Advertorial

AOAC-RI Certifies Hygiena UltraSnap™ Surface ATP Test

Posted: 28 November 2018 | | No comments yet

Hygiena, a global leader in rapid food safety and environmental sanitation testing, announced the AOAC Research Institute, one of the world’s most recognizable product certification organizations, has issued its Performance Tested MethodSM certificate to the UltraSnap™ Surface ATP Test for identifying the possible presence of microbial contamination. 

As required for AOAC-RI certification, Hygiena used a third-party laboratory to test the results of UltraSnap on stainless steel surfaces in five food matrices, essentially reproducing a food processing facility.

The test results showed very low limits of detection (down to 0.77 relative light units {RLU}, the measure generated by ATP-based luminometers). The results also showed that UltraSnap was able to detect ATP from surface soiled by food and beverages, at dilutions of 1:1,000 or lower. The UltraSnap was shown to be highly selective for ATP, stable and consistent, and to have no statistically significant variability.

The validation marks the first of Hygiena’s ATP-based test products, and only the second ATP monitoring device, to receive an AOAC certification.

“We are delighted that the most used ATP system around the world has been verified and validated for its accuracy and sensitivity by the AOAC,” said Steven Nason, Chief Executive Officer of Hygiena. “This validation is helpful for certain customers and government bodies around the world and validates the claims we have been making on the system for years.  ATP testing is the fastest and most effective way for food processing facilities to determine cleanliness levels and accurately identify areas that need attention before food is processed which helps keep our food supply safer.”

ABOUT AOAC PTM

The AOAC Performance Tested MethodsSM (PTM) program began in 1992 and has evolved into a premier method certification program for proprietary methods. Methods certified as Performance TestedSM were found to perform according to the manufacturer’s documented claims and are used throughout the global market place and within the regulatory arena. The PTM program offers certification as an endpoint for method evaluation or as an entry to method validation for programs requiring increased confidence and method reproducibility information. PTM certification includes licensing the method developer to use the Performance TestedSM certification mark.

Related topics

,

Related organisations

Related people

Leave a Reply

Your email address will not be published. Required fields are marked *